Aluminum clear span structure with an unobstructed interior
CLEAR SPAN STRUCTURES · 3–50 M

Clear Span Structures Manufacturer with Custom Engineering Support

You can configure a column-free clear span tent for commercial events, temporary storage, worship spaces and large project enclosures. Your structure can combine a 3–50 m span, 2.5–6.0 m eave height, modular 3 m or 5 m bays, 6061-T6 aluminum profiles and project-based wind, snow, anchoring and enclosure selection.

  • Unobstructed interior across the full structural width
  • Profile sections selected for span, height and load conditions
  • Factory pre-assembly and inspection before export packing
Compare Clear Span Series
CLEAR SPAN RANGE

Choose the Series by Span, Use and Structural Demand

Your first decision is not a model name. Start with the clear width you need, then check eave height, bay length, wind or snow conditions, ground surface, openings and enclosure weight. The four paths below keep size, application and roof-form decisions connected.

Clear span tent series arranged by structural width

Small & Medium Clear Span Series

3–15 m span

You can use this range for smaller event layouts, rental fleets, dining areas, entrances and compact storage projects. Typical engineering review focuses on footprint efficiency, 3 m or 5 m bay planning, eave height, transport package and the anchoring available on your site.

10m Clear Span Tents
Clear span tent series arranged by structural width

Large Event & Commercial Clear Span Series

15–30 m span

You gain a larger uninterrupted floor for banquets, exhibitions, sports, temporary halls and multi-zone commercial events. Your profile section, bracing, access openings, wall system and foundation strategy become more important as span and enclosed area increase.

Clear span tent series arranged by structural width

Heavy-Duty Industrial & Mega Clear Span Series

30–50 m span

You can plan large temporary warehouses, project halls, high-capacity gatherings and worship spaces without interior support columns. Your structural review must connect the selected span with eave height, wind and snow actions, large doors, enclosure state, operational loads and site-specific anchoring.

Clear span tent series arranged by structural width

Roof & Structural Profile Variations

Alternative forms on modular frame systems

You can move beyond a standard gable form when your project needs a curved roof, polygon profile, additional level or a different frame-tent format. Compare the structural form before treating appearance as a cosmetic choice, because roof geometry changes drainage, interior volume, connection details and engineering review.

ENGINEERING PARAMETERS

Build Your Specification from Span to Enclosure

You can use these verified ranges to prepare an initial specification. Your final profile, bracing, anchoring and cover package must still be checked against the complete project conditions.

Selection Field Available Range or Construction What You Need to Check
Clear Span Width 3–50 m with no internal support columns Your usable floor width, site access, load conditions and required openings
Eave Height 2.5–6.0 m Your door height, racking, stage, lighting, HVAC and internal clearance
Length Module 3 m or 5 m bays Your total footprint, expansion plan, internal zoning and site boundary
Main Frame 6061-T6 anodized extruded aluminum Your span, eave height, wind and snow basis, opening state and frame spacing
Profile Section Range From 84 × 48 × 3 mm to 300 × 125 × 5/8 mm profile steps Your final section must match the current engineering drawing and project load case
Steel Connections Hot-dip galvanized steel connectors Your node configuration, corrosion environment, anchoring interface and inspection scope
Roof Cover 850 g/m² blackout double-sided PVC-coated polyester Your light control, fire requirement, weather exposure and drainage plan
Sidewall Option 650 g/m² translucent double-sided PVC-coated polyester Your daylight, privacy, ventilation, door and hard-wall requirements
Wind Selection Common project selection at 80–100 km/h with project reinforcement up to 120 km/h Your site wind basis, exposure, span, eave height, openings, anchoring and local rules
Engineering and Fire Basis EN 13782 principles with DIN 4102 B1/M2 and NFPA 701 fire-retardant options Your exact product configuration, approval route and project-specific supporting documents
Aluminum profile section range for clear span structure selection

Aluminum Profile Selection Is a Structural Decision

Your wider span, higher eave, larger openings and more demanding wind or snow conditions can require a larger profile section, additional bracing or a different bay and anchoring strategy. Do not select an aluminum section from span alone.

Caution: Wind values are not standalone guarantees. Your final design basis depends on span, height, enclosure state, anchoring, exposure, ground condition, local requirements and the applicable calculation.

FROM PROJECT CONSTRAINT TO STRUCTURAL RESPONSE

Resolve the Conditions That Change the Structure

You Need More Usable Floor Without Interior Columns

A clear span frame keeps your interior free of centre poles, but a wider opening also increases the demand on the frame, connections and anchoring. Your solution is a graduated aluminum profile and bracing selection tied to span, eave height, bay spacing, enclosure and the project load basis. You gain an open floor plan without treating every width as the same structure.

Clear span tent interior without columns

Your Ground Surface Limits the Anchoring Method

Concrete, grass, asphalt and finished decks cannot share one default anchor detail. Your anchoring plan must consider substrate strength, penetration limits, uplift, sliding, drainage and restoration requirements. The structure and ground interface are reviewed together so your frame specification does not ignore the site boundary.

Ground interface options for a clear span tent structure

Your Doors, Walls, Flooring and HVAC Must Fit the Frame

Large access doors, glass walls, hard walls, raised flooring and climate control add interface and load requirements. Your configuration should coordinate these elements during CAD and engineering review, before production fixes the bay layout, connection points and enclosure package.

Wall, flooring and HVAC interfaces on a clear span tent frame
WHY THE STRUCTURAL SYSTEM MATTERS

Your Project Gains Value from the Complete Frame Logic

Structural section of clear span tent
1

Column-Free Interior

You can use the full width for guest seating, stages, aisles, pallet layouts, equipment or worship areas without planning around centre poles.

2

Bay-Based Length Planning

You can extend the footprint in 3 m or 5 m bays, which helps you connect total length with site boundaries, internal zones and future layout changes.

3

Material and Section Choice

You receive a frame built around 6061-T6 anodized aluminum profiles and hot-dip galvanized steel connections, with the section and bracing selected for your engineering conditions.

4

Pre-Assembly Before Packing

Your core components can be trial assembled in the factory so connection fit, component matching and packing batches are checked before export shipment.

APPLICATION AND ENCLOSURE PATHS

Connect Your Clear Span Frame to the Way the Space Will Operate

Your application changes the required floor area, access points, wall type, ventilation, lighting, climate control and installation plan. Use the structure as the starting platform, then follow the relevant solution and accessory paths.

Warehouse and Industrial Storage

Warehouse and Industrial Storage

You can plan clear internal width around pallet rows, forklift aisles, loading doors, racking height and operating duration. Your enclosure and HVAC choices should follow the stored goods, local climate and access frequency.

Warehouse Tents
Commercial Events and Large Gatherings

Commercial Events and Large Gatherings

You can size the structure around seating, circulation, stages, catering, service zones and emergency egress. Your roof, walls, flooring and climate package should be coordinated with the event layout.

Commercial Event Tents
Church and Worship Spaces

Church and Worship Spaces

You can create an unobstructed congregation area with a defined stage, central aisle, side circulation and ventilation plan. Your local wind, rain, ground and installation resources remain part of the structural selection.

Church Tents for Sale

Your enclosure package can connect the frame to access, weather protection, interior finish and comfort requirements.

PRE-ASSEMBLY AND FACTORY INSPECTION

Your Structure Is Checked Before It Reaches the Site

Your incoming aluminum and PVC materials are checked for aluminum hardness and membrane weight before production. CNC profile processing and high-frequency PVC welding then follow the confirmed configuration and material package.

Your welded and high-frequency seams undergo pull-off testing within the applicable production scope. Core frame components are trial assembled in the factory, while packing lists and export packaging are checked by batch before shipment.

  • Incoming aluminum hardness and PVC weight checks
  • Weld and high-frequency seam pull-off tests
  • Factory pre-assembly of core frame components
  • Packing list and export packaging verification
Factory pre-assembly inspection of clear span frame components Factory pre-assembly inspection of clear span frame components Factory pre-assembly inspection of clear span frame components
BUYER SELECTION GUIDE

Four Engineering Questions to Resolve Before You Select the Frame

You can narrow the correct clear span series by resolving four connected questions: how width changes the structural section, how the ground changes anchoring, how your operation changes floor area and how severe wind or snow conditions change the reinforcement logic.

How Do Span and Aluminum Profile Section Relate?

Your clear width creates the primary bending and stability demand, but span alone does not select the profile. Your eave height, bay spacing, enclosure state, door openings, bracing, wind and snow basis, anchoring and exposure conditions can change the required section.

TentsMaster clear span structures use a real profile ladder from 84 × 48 × 3 mm to 300 × 125 × 5/8 mm. You should treat the ladder as an engineering range, not a catalogue shortcut that assigns one section to every project with the same width.

Initial Span Band Profile Review Direction Conditions That Can Move the Selection
3–15 m Small and medium profile steps within the verified section range Higher eave, enclosed walls, local wind, snow, large doors and repeated installation
15–30 m Larger frame sections and bracing review become more important Longer bays, heavier enclosure, event rigging interfaces, access openings and anchoring limits
30–50 m Heavy-duty profile, bracing, node and foundation review High eave, large enclosed area, severe exposure, warehouse doors, snow accumulation and operational constraints

These bands guide the review sequence only. Your current engineering drawing and project load case determine the final section.

What Changes Between Concrete, Grass, Asphalt and a Non-Penetrating Deck?

Your frame can only transfer uplift and horizontal actions through an anchoring system that matches the actual substrate. Surface appearance is not enough; you need to understand what structural material lies below it and whether penetration is permitted.

Ground Surface Typical Engineering Route Boundary to Confirm
Concrete Engineered anchor bolts or another verified connection to the slab or foundation Slab thickness, strength, edge distance, embedded services and removal requirements
Grass or Soil Ground stakes or earth anchors selected for verified soil and uplift conditions Soil capacity, buried utilities, drainage, seasonal saturation and permitted penetration
Asphalt Connection to a verified structural base below the asphalt or an engineered alternative Asphalt alone should not be assumed to provide structural anchorage
Finished Deck or No-Penetration Site Engineered ballast or connection to a verified supporting substructure Uplift, sliding, ballast footprint, deck capacity and local approval

Do Not Choose Ballast by Tent Area Alone

Your required ballast depends on the complete load path, frame geometry, exposure, enclosure, friction, sliding resistance and local design basis. A generic weight per square metre can be unsafe when the project conditions change.

How Can You Convert Guest Count or Pallet Positions into a Starting Footprint?

Your clear span area is width multiplied by length, but usable capacity depends on what must fit inside. Begin with a transparent planning allowance, add circulation and support space, then verify egress, aisle, equipment and local-code requirements before fixing the structure.

Preliminary Banquet Example

  • Step 1: 300 seated guests × 1.2 m² per guest planning allowance = 360 m²
  • Step 2: Add 25% for circulation, stage, service and support zones = 450 m²
  • Step 3: A 15 m × 30 m clear floor gives 450 m² as an initial footprint for layout development

Your final plan must verify table format, aisles, exits, stage, catering, accessibility and local occupancy rules.

Preliminary Pallet Storage Example

  • Step 1: 100 pallet positions × 2.5 m² preliminary allowance including working aisles = 250 m²
  • Step 2: Add 20% for receiving, clearance and operating zones = 300 m²
  • Step 3: A 15 m × 20 m clear floor gives 300 m² as an initial footprint for warehouse layout review

Your final plan must verify pallet size, racking, forklift turning, door positions, fire aisles, eave height and operational flow.

What Changes for Cold Regions, High Wind or Snow Exposure?

Your reinforcement logic begins with the site design basis, not a generic weather label. Wind review connects the reference wind condition with exposure, span, eave height, bay spacing, open or enclosed walls, door state, bracing and anchoring. Snow review adds roof geometry, accumulation, drifting, drainage, operating temperature and the applicable local requirement.

A more demanding project can require a larger aluminum section, closer frame spacing, added bracing, reinforced nodes, a different anchoring strategy or an operational plan for doors and roof loading. TentsMaster can support project selection under EN 13782 engineering principles, with common wind selection at 80–100 km/h and project reinforcement up to 120 km/h when the complete conditions allow it.

  1. Confirm site location, local wind and snow basis, exposure and approval route
  2. Confirm span, eave height, bay spacing, openings and enclosure state
  3. Review profile section, bracing, nodes, anchoring and foundation interaction
  4. Issue the project-specific configuration and supporting engineering scope

Your wind or snow number is only one input. Keep the selected doors, walls and anchoring condition consistent with the design assumptions during use.

CLEAR SPAN ENGINEERING INQUIRY

Send the Inputs Needed to Review Your Structure

You can begin with your required clear width, total length, eave height, installation surface and known wind, snow or enclosure conditions. A site plan or CAD drawing helps connect your footprint, openings, accessories and anchoring boundary during the configuration discussion.

  • Your intended use and project location
  • Your clear span width, total length and eave height
  • Your ground surface, openings, walls and accessory scope
  • Your known wind, snow, fire or local approval requirements

Include your known wind or snow basis, open or enclosed wall condition, doors, glass or hard walls, flooring, HVAC and local approval requirements.

Supported formats: PDF, JPG, PNG, STEP, IGES, STL, DWG (Max 20MB)

Your final structure and engineering scope will be reviewed against the complete project conditions.